Projects

FILTER PROJECTS

  • All
  • Hydrodemolition
  • Surface preparation
  • Tank cleaning
  • Tanker units
  • Waste Water
  • Other Applications
  • Surface preparation

London Paint Removal

We were tasked with an exercise to remove some paint from the underside of a rail bridge. A team of two experienced Operatives travelled up to central London and completed a night shift to remove the paint using ultra-high pressure (UHP). The job consisted of working on a Scissor lift and using a UHP rotary […]

View Project

Swimming Pool Surface Prep

U.H.P water jetting at 2800 BAR was used to remove the surface finish for a large commercial swimming pool. One of the UK’s leading Tiling contractors was so impressed with the finish, which allowed an excellent bond for the render coat, they now specify the U.H.P surface preparation technique on all pool tiling contracts – […]

Salt Barn Hydrodem

The main structure of the Highways Saltbarn was in poor condition. This was due to the Chloride attack from the salts stored, which resulted in a deterioration of the concrete. Hydrodemolition techniques made light work, with 10m3 removed in just 6 shifts!
  • Hydrodemolition
  • Tanker units

Plinth Removal – Phase 2

Following the successful completion of phase 1, the team returned to site to undertake Hydro-demolition on a second plinth. The second plinth posed a more complex operation, as it was bigger in size and had restricted access due to the placement of the beams. The Operatives strategically planned around this and completed the second phase […]
  • Hydrodemolition
  • Tanker units

Plinth Removal – Phase 1

We recently had a job come in to remove a plinth from a newly built bridge. The reason for the plinth removal was because the original concrete pour did not reach strength. On arrival, the Jetting team built an enclosure around the plinth and mobilised the Jetting machine and Siltbuster. A Siltbuster HD unit was […]

PAINT REMOVAL FOR LONDON RAIL BRIDGE

Ultra-High Pressure Water Jetting is able to remove high percentages of soluble salts from steel surfaces without generating spent abrasives, which can be costly to dispose of. The higher the pressures used the less water is needed. The process warms the surface being treated, which allows the water to dry quickly without generating sufficient heat […]
  • Surface preparation

London Paint Removal

We were tasked with an exercise to remove some paint from the underside of a rail bridge. A team of two experienced Operatives travelled up to central London and completed a night shift to remove the paint using ultra-high pressure (UHP). The job consisted of working on a Scissor lift and using a UHP rotary […]

Foundation Slab Hydrodem

A recent project was undertaken for a Southampton building contractor, who was extending a multistorey car park. They needed to install more foundation piles, however in three areas, they encountered the existing concrete foundation. The concrete was removed using high volume Hydrodem techniques over three shifts.

Exposing Couplers HS2

Approximately 2km of diaphragm wall needed the top 50mm-100mm removed to expose couplers, in readiness for the roof section rebar to be fitted. Hydrodem techniques were employed because the poor quality final concrete left by the piling rigs could be removed, and the couplers could also be exposed without damaging the important threaded section – […]
  • Surface preparation

Dirft

We recently completed a job of surface preparation to the inside of a building. The team very carefully used ultra-high pressure, to ensure that there was no damage to any other areas of the deck. This job consisted of the scabbling the edges of holes formed in an existing floor, to accommodate a vast mezzanine […]
  • Hydrodemolition
  • Tanker units

D-Wall

We have recently completed a contract of jetting the top of a D-Wall, with approximately 59m3 of concrete to be removed using high pressure water jetting. A D-Wall is a rectangular pile sunk unto the ground. Often, the last section of concrete is contaminated with ground deposits but the main requirements were to create a […]

BAE Grout Pipeline

Sabre Jetting were asked to remove site debris and grout build up from 40m deep pile tubes. A 40m long flexible lance was attached to a specially designed lance extension and ceramic cutting nozzle. Approx 40 of the tubes were cleaned successfully.
  • Hydrodemolition

WEST MIDLANDS M-SHAPED DOUBLE ARCH STRUCTURE

Requirements We are currently on a job in the West Midlands that requires hydro demolition to an m-shaped double arch structure that has sustained micro-fracturing due to stress loading, which makes this a major contender for water jetting. The job consists of cutting concrete to the structure of an underground tunnel. Hyrdodemolition The nature of […]
  • Hydrodemolition

TYSELEY SINGULAR HYDRAULIC RAM FAILURE

Requirement A failure of a singular hydraulic RAM caused major structural damage to the steel work frame which acted as foundation anchoring which included 11 other rams. The single failure caused visible cover damage to the surrounding concrete and supporting framework which the client wanted to have fully inspected to find the extent of the […]
Sabre Jetting using surface preparation services for coatings removal
  • Hydrodemolition

SPRING HILL BRIDGE

Requirement After completing a site visit at the request of the client the job requirement was to remove 6m3 of concrete infill from within the bridge deck trough system to allow the installation of services to accommodate a new housing build north of the canal bridge. The canal bridge spanned over a canal below, as […]
  • Hydrodemolition

PORT OF DOVER

The Port of Dover is Europe’s busiest ferry port and ramps A and B are critical to the day-to-day operations of the port for the loading and unloading of vehicular traffic from ferries arriving and departing the port. The importance of the works program being on time in this setting is crucial and we were […]
Concrete removal shown at A5 River Ceiriog project
  • Hydrodemolition

A5 River Ceiriog

Sabre Jetting recently completed the removal of approximately 10m3 of concrete to the bridge deck on the A5 near Chirk nearly two days ahead of schedule. The bridge deck was constructed in the early 1980s. It was quite heavily reinforced and post tensioned. During the removal the tendon anchor plates were partially exposed meaning the […]
  • Hydrodemolition
  • Tanker units

A1260 BRIDGE STRUCTURE

The work on the A1260 was carried out for Osborne.
hydrodemolition used for concrete removal at Newport Jetty project
  • Hydrodemolition
  • Surface preparation

NEWPORT JETTY

Hydrodemolition was required to remove deteriorating concrete from the underside of the jetty.
  • Tank cleaning

AKZO NOBEL

Sabre Jetting Services regularly cleans tanks for Akzo Nobel in Birmingham.
hydro demolition contractors using industrial hydroblasing to aid concrete removal at Midland Links project
  • Hydrodemolition

MIDLAND LINKS PROJECTS

Our first midland links project, R9, was carried out in 1990 and since then we have been a vital part of numerous contracts on the area 9 partnering scheme.
hydrodemolition of bridge decks at QEII bridge project
  • Hydrodemolition
  • Tanker units
  • Waste Water

QEII BRIDGE

The hydrodemolition works at the QEII Bridge were amongst the most difficult that we have carried out in recent years.
Sabre Jetting on site at A1(M) Barton Interchange Lightwell Replacement project for hydrodemolition services
  • Hydrodemolition
  • Waste Water

A1(M) Barton Interchange Lightwell Replacement

A1(M) Barton Interchange Lightwell Replacement Hydro demolition to 2no. Lightwell Bases Location – A1(M) Deck – North and South Bases – 18m³ of concrete • 2 Jetting Teams • 1 Bowser Driver • 2 Tanker based Jetting units • 1 Van based Jetting unit South Bridge 10/01/22 – Mobilisation to site including induction 11/01/22 – […]
Sabre Jetting operative team at M27 Junction 9 hydrodemolition project
  • Hydrodemolition
  • Tank cleaning
  • Waste Water

M27 JUNCTION 9

Cost effective hydrodemolition work on the M27 Junction 9 Pier Replacement project.

WORK WITH US

We are always happy to make new connections,
so if you wish to work with us or simply want more information regarding Hydro Demolition, Surface Preparation and Tank Cleaning

Click here to get in touch